What is the reason why the woodworking engraving machine is easy to break the knife when engraving?

      In the process of engraving machine running and processing, there are cases of broken knives, and the situation of broken knives is divided into many types, such as: normal broken knives, abnormal broken knives. These two situations are also divided into a variety of reasons, so today I will tell you about the situation and reasons for the broken knife.
In the case of a normal broken knife, it is generally that the tool has exceeded the service life and the wear is excessive. However, when the engraving machine causes uneven carving resistance or excessive resistance and causes the broken knife during engraving, we call it a normal broken knife, and the quality of the cutter is different. Its service life is also different, so this convenient knife is generally unavoidable.
  Abnormal broken knife: This type of accident is generally caused by the small details of the operation of the machine, or the setting of the machining program does not match the engraving machine, resulting in an accidental broken knife when the prop has not reached the end of its service life. This kind of broken knife, we must fully understand the situation and the cause of the accident, why the broken knife, from where it is wrong, where should be improved, how should we operate to avoid this phenomenon of broken knife, so as to greatly improve production The efficiency, but also for you to share a few reasons for the accidental broken knife in the process of carving the knife;

   1, processing procedures
   The machining program is the instruction of the engraving machine. It contains the position command and speed. It is the basis of the machine movement. Some control factors such as engraving depth will directly affect the resistance of the tool. The speed of the machining speed will also directly affect the resistance of the tool. Therefore, whether the correctness and accuracy in the machining program directly affects whether the tool will break the knife. A good machining procedure should be considered from the bearing capacity of the tool and the texture of the material. For example, the comparison of the red wood should be appropriate. To reduce the depth of the engraving machine and the speed of the engraving machine, if necessary, you can choose to design the layer engraving to engrave.

   2, woodworking engraving machine level problem;

   Generally, when purchasing a machine, there will be a professional technician to go to the machine to debug the machine. After the test is completed successfully, sometimes the engraving machine may need to be moved. After moving, the machine may be verified. Recalibration of the factors, otherwise there may be uneven resistance or uneven resistance of the tool during the engraving process, which leads to the easy breakage of the tool. Therefore, the level of the table must be adjusted after the machine is moved. .
  There are other reasons, such as: engraving tools, when buying a tool, it depends on whether the tool's own conditions are passed, and whether the strength is directly related. There is also the engraving machine material: the selection of materials and matching tools should also pay attention to it. For example, the hard material should be relatively replaced and the processing speed should be adjusted appropriately. This can also effectively reduce the damage of the tool.
   The operation of the engraving machine is completely no problem after the technicians debug it. The unexpected factors or external disturbances that follow, and some problems are inevitable, so the best way is when the technicians come to the door. It is necessary to study hard, observe the operation of the technology and learn the technical expertise and precautions with the technology, try not to move the machine, keep the good running state, and the standard after the technician has finished debugging.