One-way bearings are an important part of a major industrial equipment. Bearing problems can result in costly downtime, equipment damage and failure. In addition, large industrial bearings represent a large capital investment.
In order to operate reliably with high equipment performance and minimum maintenance costs, the correct treatment must be followed. This includes bearing storage, cleaning, cleaning, inspection and installation.
The service life of any one-way bearing depends to a large extent on the maintenance and maintenance it receives. This is especially true in industrial applications where working conditions are harsh, heavy loads, dust and pollution are common.
Suitable for all anti-friction bearing designs. One-way bearings are available with special anti-corrosion coatings, but most bearings are not made of corrosion-resistant materials. Bearings that are handled and stored must be handled with care to ensure they do not rust or corrode. Even a hand or a small amount of chemical gloves left in a wet or unprotected relationship can cause etching in a small area, which can cause bearing fatigue.
First, use the installation carefully
Strong stamping is not allowed. It is not allowed to directly hit the bearing with a hammer. It is not allowed to transmit pressure through the rolling elements.
Second, use appropriate and accurate installation tools
Try to use special tools and try to avoid using cloth and short fibers.
Third, try to keep the one-way bearing and its surrounding environment clean
Even if the smiling dust that is invisible to the naked eye enters the bearing, it will increase the wear, vibration and noise of the bearing.
Fourth, to prevent the corrosion of one-way bearings
When taking the one-way bearing directly by hand, wash off the sweat on the hand and apply it with high-quality mineral oil before handling. In the rainy season and summer, pay special attention to rust prevention.
Under certain special operating conditions, one-way bearings can achieve longer life than traditional calculations, especially at light loads. These special operating conditions are when the rolling surfaces (tracks and rolling elements) are effectively separated by a lubricant film and the surface damage caused by contaminants is limited. In fact, under ideal conditions, the so-called permanent one-way bearing life is possible.
For more information and purchase please visit: https://www.supplyforever.com
